Skip to content

Description

The Ebara DW M 75 A submersible electric pump is a single-phase 230V waste water pump, in the A version with float. It is used to drain civil and industrial waste water, empty wells or excavations, empty cesspits and handle heavily loaded liquids with solids. It has a flow rate of up to 700 l/min (42 m³/h) and a head of up to 13 m.

Three stainless steel submersible electric pumps with cage base, immersed in a splash of water

Passage of solids up to 50 mm and liquid up to 40 °C

The maximum solids passage is 50 mm and the maximum liquid temperature is 40°C. The DW M 75 A is suited to heavily loaded liquids with solid and stringy matter in suspension.

Submergence up to 7 m with IPX8 protection rating

The pump can work submerged up to 7 m and has an IPX8 protection rating. The motor is an asynchronous 2-pole self-ventilated type, with insulation class F. In the single-phase version the capacitor is permanently connected and the thermal-amperometric protection resets automatically.

Body and wetted parts in AISI 304 with double mechanical seal

Pump body, impeller, motor cover, seal carrier disc and motor casing are in AISI 304 stainless steel, with an AISI 303 shaft. The double mechanical seal has an oil chamber between the two seals.

Frequently asked questions

What jobs is the Ebara DW M 75 A used for?
The Ebara DW M 75 A is used to drain civil and industrial waste water, empty wells or excavations, drain areas below ground level and empty cesspits.
What solids can the Ebara DW M 75 A pass?
The Ebara DW M 75 A has a maximum solids passage of 50 mm and can handle heavily loaded liquids with solid and stringy matter in suspension.
How deep can the Ebara DW M 75 A be submerged?
The Ebara DW M 75 A can be submerged up to 7 m and has an IPX8 protection rating.
What material is the body of the Ebara DW M 75 A?
The pump body, impeller, motor cover, seal carrier disc and motor casing of the Ebara DW M 75 A are in AISI 304 stainless steel.
What power cable does the Ebara DW M 75 A have?
The single-phase version of the Ebara DW M 75 A has 10 m of H07 RN-F power cable.

Technical specifications

MaterialsAISI 304 for pump body, impeller, motor cover, seal carrier disc and motor casing
ShaftAISI 303
Upper seal (motor side)carbon/ceramic/NBR
Lower seal (pump side)SiC/SiC/NBR
SpacerG20 cast iron (only for DW-DW VOX 300)
Power supplysingle-phase 230V ±10%, 50Hz
Flow rateup to 700 l/min (42 m³/h)
Headup to 13 m
Maximum submergence7 m
Maximum liquid temperature40°C
Maximum solids passage50 mm
Insulation classF
Protection ratingIPX8
Motorasynchronous 2-pole self-ventilated
Motor protectioncapacitor permanently connected and automatic-reset thermal-amperometric protection (single-phase)
Protectionto be provided by the user for the three-phase version
Power cable10 m H07 RN-F type (single-phase); FG50K type for the three-phase version
Threaded version connectionssuction ø50, discharge G2
Flanged version connectionsdischarge ø50 DN 50
FloatA version with float
Versions availablesingle-channel or vortex (VOX) impeller; flanged (F); with or without float