Sanitrit Sfa
SFA Pump Model Sanishower Plus + Code SH+
SFA Pump Model Sanishower Plus + Code SH+

Couldn't load pickup availability
Shipping and delivery
Shipping and delivery
Timing. With online payment, your order leaves with express courier and arrives within 1-2 working days. In remote areas and on islands, a few extra days may be needed: the estimated delivery date for your postcode is shown under “When it arrives”.
Costs. For orders under €80, shipping costs €8. Delivery to your floor is available for an additional charge.
Availability. Each product shows whether it is in stock, whether only a few units are left, or whether it is sold out; for sold-out products, you can leave your email and we will let you know as soon as they are back in stock.
Your order. You can track it from your account. For any questions, you will find our contact details on the Contact page; all the terms are on the Shipping page.
Support before and after purchase
Support before and after purchase
For advice on choosing a product, a technical question or an order already placed, the Buytutto customer service team is available Monday to Friday, 9:00 am to 1:00 pm and 2:00 pm to 6:00 pm.
You can message us on WhatsApp using the button on this page, or use the contact details on the Contact page. For a product you have already received, open a request from the Support page.
Description
The Sanishower Plus + (Code SH+) from Sanitrit Sfa is a drain pump for a standard shower tray. It is installed beside or under the tray, with access for maintenance, and has two low side inlets that also allow you to connect a washbasin or bidet.
Overcomes gravity drainage problems
The pump makes it possible to install showers in the basement, where gravity drainage does not reach. The vertical and horizontal discharge values are listed in the technical specifications.
Quiet at 40 dB(A), with activated carbon filter
The motor runs quietly, and the activated carbon filter neutralises drain odours.
Low height: activation at 65 mm
With a height of 12 cm from under the shower tray and activation at 65 mm, the pump fits under the tray or inside a bathroom unit.


Frequently asked questions
Can the Sanishower Plus + SH+ be installed under the shower tray?
How noisy is the Sanishower Plus + SH+ pump in operation?
Does the Sanishower Plus + SH+ filter help against odours?
Does the Sanishower Plus + SH+ work with a water softener?
What gradient is needed between the drain outlet and the Sanishower Plus + SH+?
Is a clapet valve included with the Sanishower Plus + SH+?
Technical specifications
| Code | SH+ |
| Model | Sanishower Plus + |
| Use | shower and washbasin |
| Inlets | 2 low side inlets, 32 mm |
| Vertical outlet diameter | 32 mm |
| Activation height | 65 mm |
| Shower tray height | 12 cm (from under shower tray) |
| Net weight | 3.5 kg |
| Vertical discharge | 6.5 m (in the description bullet points: 5 m) |
| Horizontal discharge | 65 m (in the description bullet points: 50 m) |
| Average inlet waste water temperature | 35°C |
| Recommended gradient between drain outlet and pump | 3% |
| Noise | 40 dB(A) |
| Filter | activated carbon to neutralise odours |
| Valve | clapet, supplied |
| Suitable for | water softeners |
| Power supply | 220-240 V / 50 Hz |
| Motor power | 400 W |
| Maximum current draw | 1.3 A |
| Electrical class | I |
| Protection rating | IP44 |
| Standards | EN12050-3 |
| Size | compact for discreet installation |

