Skip to content

Description

The manual sediment filter ACQUA BREVETTI Bravo FT304 has 1" F connections, a standard filtration grade of 100 µm and a flow rate of 8.7 m³/h. It is a compact filter with a built-in drain tap for removing dirt, designed for the water line of residential and heating systems. The FT304 model has no pressure gauge.

Brass head and Grilamid bowl

The head is made of brass, with threads to EN 10226-1 and EN 228-1 standards. The bowl is made of Grilamid® (high-strength polyamide) and has a built-in drain tap to release accumulated dirt.

Stainless steel cartridge resistant to pressure shocks

The AISI 316 stainless steel cartridge is crimped onto a bushing with an o-ring seal. Its structure makes it resistant to pressure shocks, eliminating the problem of deformation and crushing.

Inside-to-outside filtration at 100 µm

The filter works from the inside of the cartridge outwards. The standard filtration grade is 100 µm, and a 50 µm grade is also available. At a flow rate of 8.7 m³/h, the pressure loss is 0.5 bar.

With or without 0-12 bar pressure gauge

The Bravo is available in two versions, with and without a 0-12 bar pressure gauge. The FT304 model has no pressure gauge.

Supplied items: bowl key and brush

The supply includes the Bravo filter, the key for opening the bowl, the brush for cleaning the cartridge, and the instructions for use, maintenance and installation, with declaration of conformity. The inlet and outlet have plugs that must be removed at installation.

Cold drinking water and heating and cooling networks

The Bravo FT304 is designed for filtering cold drinking water in mainly residential settings. It can protect cold water distribution networks, supply lines for heating and cooling systems, and process water networks.

Installation: downstream of the meter and with bypass

The filter must be installed at the system inlet, immediately downstream of the main meter and upstream of the system to be protected. Fit a bypass that allows the filter to be isolated in case of malfunction without interrupting supply, and a visible drain below the filter for flushing water. On drinking water lines, install sampling taps upstream and downstream. Installation must comply with D.M. n° 37/2008, D.M. n° 25/2012 and local regulations, and the supplied Instruction Manual should be consulted.

Installation diagram of a water filter with by-pass, meter, pressure reducer and drains

Dimensions table of a filter, showing width

Frequently asked questions

Which systems is the Acquabrevetti Bravo FT304 sediment filter used for?
The Bravo FT304 is designed for cold drinking water in mainly residential settings. It can protect cold water distribution networks, supply lines for heating and cooling systems, and process water networks.
What filtration grade does the Bravo FT304 work at?
The standard filtration grade of the Bravo FT304 is 100 µm. The filter works from the inside of the cartridge outwards, and the 50 µm grade is listed as available.
What materials is the Bravo FT304 filter made of?
The Bravo FT304 has a brass head, a polyamide bowl (high-strength Grilamid®) and an AISI 316 steel cartridge.
What pressures and temperatures can the Bravo FT304 work at?
The Bravo FT304 operates at an operating pressure of 1.5 to 10 bar, a water temperature of 5 to 30 °C and an ambient temperature of 5 to 40 °C.
Where should the Bravo FT304 filter be installed?
The Bravo FT304 should be installed at the system inlet, immediately downstream of the main meter and upstream of the system to be protected, with a bypass and a visible drain below the filter.
How is the Bravo FT304 filter maintained?
For cleaning, open the bowl with the supplied key and use the brush on the cartridge. For sanitising work, contact an Authorised Service Centre.

Technical specifications

Model and codes
ModelBravo 1" F
Product codeFT304
Connections
Connections1" F
Pressure gaugenot included
Thread standardEN 10226-1 and EN 228-1
Hydraulic performance
Flow rate8.7 m³/h
Pressure loss at flow rate0.5 bar
Standard filtration grade100 µm
Available filtration grades50 µm
Materials
Head materialbrass
Bowl materialpolyamide (Grilamid®)
Cartridge materialAISI 316 steel
Operating limits
Operating pressure (min/max)1.5 - 10 bar
Water temperature (min/max)5 - 30 °C
Ambient temperature (min/max)5 - 40 °C
Supply and features
Drain tapbuilt-in
SupplyBravo filter, bowl opening key, brush, instructions for use, maintenance and installation (including declaration of conformity)