Skip to content

Description

The 87°30 45° Reduced Orange Inspection Fitting Ø 20 cm is a rigid PVC fitting for drainage systems, certified to EN 1401. It completes waste lines for grey water, black water and mixed wastewater. It is manufactured by Redi, a leading Italian company in the sector.

EN 1401 certified for drainage systems

The inspection fitting has passed the EN 1401 conformity tests. The product is traceable thanks to its certification.

Elastic joint with Codolo O-Ring seal

Assembly is done by fitting the sockets together. They are supplied with a pre-fitted and pre-lubricated Codolo O-Ring seal, which makes the system watertight. The joint absorbs ground stresses and movements and maintains its seal even with slight misalignment of the components.

Drainage for grey water, black water and mixed wastewater

It is used on sanitary appliances and household appliances in residential buildings, up to large kitchens or industrial laundries discharging aggressive fluids, and in schools, laboratories and industrial buildings.

When refitting the seal, the recess under the lip must face the direction of flow. To make the parts slide together more easily, the dedicated lubricant is recommended.

Frequently asked questions

What material is the orange 87°30 Inspection Fitting made from?
The orange 87°30 Inspection Fitting is made from rigid PVC, designed for drainage systems, and is certified to EN 1401.
Which drains is the 87°30 Ø 20 cm Inspection Fitting used for?
The 87°30 Ø 20 cm Inspection Fitting is used for grey water, black water and mixed wastewater, from sanitary appliances and household appliances up to kitchens and industrial laundries with aggressive fluids.
How is the orange 87°30 Inspection Fitting installed?
The orange 87°30 Inspection Fitting is installed by fitting the sockets together, with a pre-fitted and pre-lubricated Codolo O-Ring seal that makes the system watertight.
How do you refit the seal after disassembly?
After disassembly, the seal of the 87°30 Inspection Fitting must be repositioned with the recess under the lip facing the direction of flow.
Why is the 87°30 Inspection Fitting joint flexible?
The joint of the 87°30 Inspection Fitting absorbs ground stresses and movements, and maintains its hydraulic seal even with slight misalignment of the components.

Technical specifications

ModelInspection Fitting 87°30 45° reduced
Colourorange
Materialrigid PVC
DiameterØ 20 cm (200)
StandardEN 1401
SealCodolo O-Ring, pre-fitted and pre-lubricated
Joint typepush-fit, socket with elastomeric lip seal
Usedrainage of grey water, black water and mixed wastewater