Skip to content

Description

The Sanitrit Sfa Sanispeed Plus+ clear water pump, code SDS+, collects and discharges waste water from sinks, washbasins, showers, baths, washing machines, dishwashers, bidets and glass washers. It is designed for small commercial spaces such as shops, cafés, offices, bars, laundries and dental surgeries. 400 W motor, activation at 95 mm and discharge up to 7.5 m vertically or up to 70 m horizontally.

Low activation, at 95 mm

The Sanispeed Plus+ activates at a level of 95 mm, with a tolerance of +/- 15 mm according to the 2017 evolution data. The average discharge cycle time is 5 seconds.

Vertical and horizontal discharge

Vertically the discharge pipe is 32 mm; horizontally it is 32/40 mm, with a mandatory 3% gradient. With the 2017 evolution, vertical discharge is rated up to 8 m with Q = 0 L/min.

Activated carbon filter against odours

The activated carbon filter neutralises odours, as stated for the 2017 evolution. The motor is quiet, and the unit fits under utility meters or inside a cabinet, so it stays out of sight.

Four inlets for multiple appliances

With four inlets, a single unit collects the discharge from several appliances and sinks. The pump is supplied with all the accessories needed for installation.

Commercial use and limits

The data sheet indicates it for light commercial environments and also lists domestic use. It does not discharge soiled water: a toilet cannot be connected. Pumping other substances may cause faults and void the warranty.

Dimensions and weight

It measures 368x188x320 mm and weighs 6.3 kg. The diagram with dimensions in millimetres is shown below.

Technical drawing of a clear water pump with dimensions in millimetres, front and side views

Frequently asked questions

Which drains can the Sanispeed Plus+ connect?
The Sanispeed Plus+ connects a sink, washbasin, shower, bath, washing machine, dishwasher, bidet and glass washer, with four inlets on a single unit.
How far does the Sanispeed Plus+ discharge?
The Sanispeed Plus+ discharges up to 7.5 m vertically and up to 70 m horizontally, with a mandatory 3% gradient for horizontal discharge.
Can a toilet be connected to the Sanispeed Plus+?
No: the Sanispeed Plus+ does not discharge soiled water, so a toilet cannot be connected.
What pipe diameter does the Sanispeed Plus+ require?
The Sanispeed Plus+ requires a 32 mm discharge pipe for vertical runs and a 32/40 mm discharge pipe for horizontal runs.
What temperature can the Sanispeed Plus+ handle?
The operating temperature of the Sanispeed Plus+ is 35°C, and the maximum accepted temperature is 75°C for short periods.
Can the Sanispeed Plus+ be fitted with an alarm?
Yes, the Sanispeed Plus+ can be fitted with a Sanialarm, to be installed on the unit's cover.

Technical specifications

CodeSDS+
Dimensions (LxDxH)368x188x320 mm
Weight6.3 kg
Power consumption400W
Motor speed RPM2800r/min
Power supply220-240V/50Hz
Electrical classI
Protection ratingIP44
Plug typeSchuko
Cable length1200 mm
Activation95 mm (+/- 15 mm)
Average discharge cycle time5 sec
Vertical dischargeup to 7.5 m (2017 evolution: 8 m, Q = 0 L/min)
Horizontal dischargeup to 70 m
Ø horizontal discharge pipe32/40 mm
Ø vertical discharge pipe32 mm
Mandatory gradient for horizontal discharge3%
Operating temperature35°C
Maximum accepted temperature75°C
Inletsfour
Possible connectionssink, washbasin, shower, bath, washing machine, dishwasher, bidet, glass washer
Filteractivated carbon
StandardEN12050-2
Warranty2 years, extendable to 3 years with product registration
Supplied withall installation accessories
Optional accessorySanialarm, to be installed on the cover